Daftar 20 Aplikasi dan Situs Online Pencari Kerja Terpopuler dan Terpercaya di Tahun 2026

 

Daftar-20-Aplikasi-dan-Situs-Online-Pencari-Kerja-Terpopuler-dan-Terpercaya-di-Tahun-2026

Berikut adalah daftar aplikasi dan situs online pencari kerja terpopuler dan terpercaya untuk tahun 2026, mencakup opsi untuk full-time, freelance, dan remote kerja di Indonesia maupun internasional:

Aplikasi & Situs Pencari Kerja Umum & Terkemuka
1. LinkedIn: Platform profesional utama untuk networking dan melamar kerja.
2. JobStreet: Salah satu portal lowongan kerja terbesar di Asia Tenggara dan Indonesia.
3. Glints: Aplikasi populer untuk pencarian kerja, termasuk magang dan freelance.
4. Kalibrr: Fokus pada pencocokan bakat dengan AI, populer di kalangan perusahaan teknologi.
5. Indeed: Mesin pencari lowongan kerja global dengan basis data besar.
6. Glassdoor: Mencari kerja sekaligus riset gaji dan ulasan perusahaan.
7. Karir.com: Salah satu pionir situs lowongan kerja di Indonesia.
8. KitaLulus: Aplikasi pencari kerja dengan fitur keamanan untuk menghindari loker palsu.
9. Pintarnya: Aplikasi pencari kerja yang fokus pada berbagai industri.
10. Dealls Jobs: Aplikasi karier untuk konsul CV dan melamar kerja. [1, 2, 3, 4, 5]


Aplikasi & Situs Khusus Freelance, Remote, & Kreatif
11. Tech in Asia Jobs: Spesialis lowongan kerja di industri startup dan teknologi.
12. Freelancer.co.id: Platform global untuk berbagai proyek freelance.
13. Upwork: Situs internasional untuk pekerja lepas profesional.
14. Fiverr: Tempat menjual jasa kreatif (desain, penulisan, video).
15. Fastwork.id: Platform freelance lokal dengan berbagai kategori jasa. [1, 2, 3, 4]

Aplikasi & Situs Internasional/Spesialis
16. FlexJobs: Fokus pada pekerjaan remote, hybrid, dan fleksibel.
17. Monster: Situs pencari kerja global yang mapan.
18. SimplyHired: Agregator lowongan kerja yang berafiliasi dengan Indeed.
19. CareerBuilder: Situs lowongan kerja dengan fitur penilaian kemampuan.
20. HiringCafe: Platform yang membantu mencari peran remote dan teknis.

Tips Tambahan 2026:

Gunakan aplikasi yang terintegrasi dengan AI untuk scanning CV agar peluang dilirik HRD lebih tinggi.
Manfaatkan fitur "Job Alert" untuk mendapatkan info loker terbaru secara real-time.
Waspada terhadap lowongan palsu yang menjanjikan gaji tidak wajar dan meminta biaya di awal.

Read more :



Share:

Measurement of the Higgs boson mass and width using the four-lepton final state in proton-proton collisions at √s = 13 TeV

 Measurement-of-the-Higgs-boson-mass-and-width-using-the-four-lepton-final-state-in-proton-proton-collisions-10


A measurement of the Higgs boson mass and width via its decay to two Z bosons is presented. Proton-proton collision data collected by the CMS experiment, corresponding to an integrated luminosity of 138 fb^−1 at a center-of-mass energy of 13 TeV, is used. The invariant mass distribution of four leptons in the on-shell Higgs boson decay is used to measure its mass and constrain its width. This yields the most precise single measurement of the Higgs boson mass to date, 125.04 ± 0.12 GeV, and an upper limit on the width Γ H < 330 MeV at 95% confidence level. A combination of the on-and off-shell Higgs boson production decaying to four leptons is used to determine the Higgs boson width, assuming that no new virtual particles affect the production, a premise that is tested by adding new heavy particles in the gluon fusion loop model. This result is combined with a previous CMS analysis of the off-shell Higgs boson production with decay to two leptons and two neutrinos, giving a measured Higgs boson width of 3.0 +2.0, −1.5 MeV, in agreement with the standard model prediction of 4.1 MeV. The strength of the off-shell Higgs boson production is also reported. The scenario of no off-shell Higgs boson production is excluded at a confidence level corresponding to 3.8 standard deviations.


Higgs boson mass and width measurements with on-shell production

The Higgs boson mass and width are measured, using on-shell production, by fitting the m4â„“ distribution in the mass range 105 < m4â„“ < 140 GeV. The results have been determined using the CMS statistical analysis tool COMBINE, which is based on the ROOFIT and ROOSTATS frameworks. Table 1 shows the mass measurements obtained from the 1D approach, where no further assumptions have been made. In comparison to the 1D model, the 1D′BS model reduces the uncertainty by about 15%. Implementing the δm4â„“/m4â„“ categorization then gives the N –1D′BS model, which leads to an additional 10% improvement. Finally, using the D kin, bkg discriminant to reduce the background produces the N –2D′BS model with another 4% improvement. Table 5 shows the resulting m4â„“ measurements using this last model. All the measured m4â„“ values from the different fits are statistically compatible, given their uncertainties and correlations. Figure 1 displays the observed 1D likelihood scans as functions of mH, from the fits for the different 4â„“ categories and combined. Combining all the m4â„“ final states and data-taking years, our final result is mH = 125.04 ± 0.11 (stat) ± 0.05 (syst) = 125.04 ± 0.12 GeV. The largest systematic uncertainty is from the lepton momentum scale and equals 0.03 and 0.04 GeV for final states with muons and electrons, respectively. 

Table 1: Best fit values for the mass of the Higgs boson measured in the inclusive 4â„“ final state and separately for different flavor categories using the 1D approach. Uncertainties are separated into statistical and systematic uncertainties. Expected uncertainties are also given assuming mH = 125.38 GeV 

Measurement-of-the-Higgs-boson-mass-and-width-using-the-four-lepton-final-state-in-proton-proton-collisions-1

Table 2: Best fit values for the mass of the Higgs boson measured in the inclusive 4â„“ final state and separately for different flavor categories, using the final fit configuration (N –2D’BS). Uncertainties are separated into statistical and systematic uncertainties. Expected uncertainties are also given assuming mH = 125.38 GeV.

Measurement-of-the-Higgs-boson-mass-and-width-using-the-four-lepton-final-state-in-proton-proton-collisions-2


As a check on the analysis technique and the systematic uncertainty from this method, the 1D′BS model is applied to Z → 4â„“ events in the m4â„“ range 70–105 GeV. The signal shape is obtained using a convolution of a Breit–Wigner function and a double-sided Crystal Ball function. The fitted values of mZ in different subchannels are m4µ Z = 91.02 ± 0.14 GeV, m4e Z = 91.18 ± 0.45 GeV, m2e2µ Z = 91.40 ± 0.29 GeV, and m2e2µ Z = 91.40 ± 0.37 GeV, leading to a combined value of mZ = 91.17 ± 0.12 GeV, consistent with the world-average Z boson mass and with the uncertainty in agreement with the expected value of ± 0.12 GeV from simulation. The results from this analysis are combined with those extracted using data recorded with the CMS detector during Run 1 at √ s = 7 and 8 TeV. Since this analysis uses an improved method to extract the systematic uncertainties affecting lepton momentum, the lepton energy scales and resolution uncertainties are considered uncorrelated between the two runs. The combined observed result from both data-taking periods is mH = 125.08 ± 0.12 GeV = 125.08 ± 0.10 (stat)±0.05 (syst) GeV. The corresponding expected statistical and systematic uncertainties are ±0.10 and ±0.05 GeV, respectively. Figure 2 presents a summary of the Higgs boson mass measurements by the CMS Collaboration in the four-lepton decay channel.


Measurement-of-the-Higgs-boson-mass-and-width-using-the-four-lepton-final-state-in-proton-proton-collisions-3

Figure 1: The profile likelihood from the mH fit using the N –2D′BS model for each of the 4â„“ categories and combined. The change in likelihood corresponding to 68 and 95% CLs are shown by the dashed horizontal lines. Both statistical and systematic uncertainties are included in the fits.


Measurement-of-the-Higgs-boson-mass-and-width-using-the-four-lepton-final-state-in-proton-proton-collisions-4

Figure 2: Summary of the CMS Higgs boson mass measurements using the four-lepton final state. The red vertical line and the gray column represent the best fit value and the total uncertainty, respectively, as measured by combining the Runs 1 and 2 data. The yellow band and horizontal black bars show the statistical and total uncertainties in each measurement, respectively. The value of each measurement is given, along with the total and statistical only (in parentheses) uncertainties.


 Higgs boson width measurement with off-shell production

Table 3: Summary of the total Higgs boson width ΓH measurement, showing the 68% CL (central values with uncertainties) and 95% CL (in square brackets) intervals for the H → ZZ → 4â„“ channel alone and in combination with the off-shell H → ZZ → 2â„“2ν channel.

Measurement-of-the-Higgs-boson-mass-and-width-using-the-four-lepton-final-state-in-proton-proton-collisions-5

Measurement-of-the-Higgs-boson-mass-and-width-using-the-four-lepton-final-state-in-proton-proton-collisions-6
Figure 3: Observed (solid) and expected (dashed) profile likelihood projections from the Higgs boson width fit using on- and off-shell production from this analysis. The analysis of the offshell H → ZZ → 4â„“ channel combined with the on-shell H → ZZ → 4â„“ channel is shown in black. The full combination of H → ZZ → 4â„“ with the off-shell H → ZZ → 2â„“2ν is given in red. The black horizontal dashed lines show the 68 and 95% CL values. 


The observed limits on Î“H are stronger than the average expected values from simulation. This is supported by the upper left, where the number of observed events in the sensitive region of m4â„“ > 340 GeV and Dbkg > 0.6 in the Untagged category is below the expected value, but still consistent with it. The smaller number of events in this region favors the hypothesis of negative interference between the signal and background contributions, which dominates over the pure signal contributions for Î“H values near the SM value. Therefore, large and very small values of ΓH are disfavored. 



A measurement of the Higgs boson mass (mH) and width (ΓH) using the decays to two Z bosons is presented. The data sample comes from proton-proton collisions at the LHC recorded by the CMS experiment at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 138 fb−1 . On-shell Higgs boson production with the H → 4â„“ decay (â„“ = e, µ) is used to measure its mass and constrain its width. The mass measurement yields m= 125.04± 25.

 Table 4: Measured values of the signal strengths µ off-shell , µ off-shell, F , and µ off-shell, V , and their 68% and 95% (in square brackets) CL intervals from the combined fit to the off-shell H → ZZ → 4â„“ and 2â„“2ν channels.

Measurement-of-the-Higgs-boson-mass-and-width-using-the-four-lepton-final-state-in-proton-proton-collisions-7


Measurement-of-the-Higgs-boson-mass-and-width-using-the-four-lepton-final-state-in-proton-proton-collisions-8
Figure 4: Observed 2D profile likelihood projection of the off-shell signal strength parameters (µ off-shell, F , and Âµ off-shell, V  ) from the fit to the combined off-shell H → ZZ → 4â„“ and 2â„“2ν channels. The best fit value is shown by the black cross and the SM prediction by the red x. The 68 and 95% CL contours are given by the dashed and solid curves, respectively. The color scale to the right of the plot relates the quantitative values. 


0.11 (stat) ± 0.05 (syst) GeV = 125.04 ± 0.12 GeV, in agreement with the expected precision of ±0.12 GeV. From on-shell production events, an upper limit of Î“H < 330 MeV is set at 95% confidence level. The mass measurement is further improved by combining data from Runs 1 and 2, leading to the most precise single measurement of the mass to date in this channel, mH = 125.08 ± 0.10 (stat) ± 0.05 (syst) GeV = 125.08 ± 0.12 GeV. Using on- and off-shell Higgs boson production with the decay to four leptons, and combining them with a separate analysis with Higgs boson decay to two leptons plus two neutrinos, we measure Î“= 3.0+2.0, −1.5 MeV, consistent with the standard model prediction of 4.1 MeV. These results are summarized in Table 5. The strength of the off-shell Higgs boson production is also reported, and the scenario of no off-shell Higgs boson production is excluded at a confidence level corresponding to 3.8 standard deviations. Results of the measurements are tabulated in the HEPData record for this analysis.


Table 5: Summary of the Higgs boson mass and total width Î“H measurements, showing the allowed 68% CL (central values with uncertainties) and 95% CL (in square brackets) intervals. Uncertainties are reported as a combination of statistical and systematic uncertainties. The first two rows display the outcomes of the analysis conducted within the on-shell H → ZZ → 4â„“ region, where the width is restricted to be positive. The third row incorporates results from the off-shell H → ZZ → 4â„“ region combined with the on-shell H → ZZ → 4â„“ and off-shell H → ZZ → 2â„“2ν.

Measurement-of-the-Higgs-boson-mass-and-width-using-the-four-lepton-final-state-in-proton-proton-collisions-9

                                                       ====== Physics =======


Read more:

Ultrafast Switch from a Bose-Einstein Condensate Matter - Practicalintroduction

A Theoretical Perspective : Spin−Orbit Coupling in 2D Semiconductors

Bill Gates Reveals Technology That Will Dethrone Smartphones, What The Technology Is?

Neuromorphic Spintronics - Neuromorphic Computing with Spin Torque Nano-oscillators

Cellular Lasers for Cell Imaging and Biosensing



References :

S. L. Glashow, “Partial-symmetries of weak interactions”, Nucl. Phys. 22 (1961) 579, doi:10.1016/0029-5582(61)90469-2. 

F. Englert and R. Brout, “Broken symmetry and the mass of gauge vector mesons”, Phys. Rev. Lett. 13 (1964) 321, doi:10.1103/PhysRevLett.13.321. 

CMS Collaboration, “The CMS statistical analysis and combination tool: COMBINE”, Comput. Softw. Big Sci. 8 (2024) 19, doi:10.1007/s41781-024-00121-4, arXiv:2404.06614. 

W. Verkerke and D. P. Kirkby, “The RooFit toolkit for data modeling”, in Proceedings of the 13th International Conference for Computing in High-Energy and Nuclear Physics (CHEP03). 2003. arXiv:physics/0306116. 

L. Moneta et al., “The RooStats project”, PoS ACAT2010 (2010) 057, doi:10.22323/1.093.0057, arXiv:1009.1003. 

CMS Collaboration, “A measurement of the Higgs boson mass in the diphoton decay channel”, Phys. Lett. B 805 (2020) 135425, doi:10.1016/j.physletb.2020.135425, arXiv:2002.06398. 

Particle Data Group, K. A. Olive et al., “Review of Particle Physics”, Chin. Phys. C 38 (2014) 090001, doi:10.1088/1674-1137/38/9/090001. 

CMS Collaboration, “Measurement of the properties of a Higgs boson in the four-lepton final state”, Phys. Rev. D 89 (2014) 092007, doi:10.1103/PhysRevD.89.092007, arXiv:1312.5353.

“HEPData record for this analysis”, 2024. doi:10.17182/hepdata.153670.



Share:

Neuromorphic Spintronics - Neuromorphic Computing with Spin Torque Nano-oscillators

 

Neuromorphic-Spintronics-Neuromorphic-Computing-with-Spin-Torque-Nano-oscillators-1

Neuromorphic computing uses basic principles inspired by the brain to design circuits that perform artificial intelligence tasks with superior energy efficiency. Traditional approaches have been limited by the energy area of artificial neurons and synapses realized with conventional electronic devices.

In recent years, multiple groups have demonstrated that spintronic nanodevices, which exploit the magnetic as well as electrical properties of electrons, can increase the energy efficiency and decrease the area of these circuits. Among the variety of spintronic devices that have been used, magnetic tunnel junctions play a prominent role because of their established compatibility with standard integrated circuits and their multifunctionality.

Magnetic tunnel junctions can serve as synapses, storing connection weights, functioning as local, nonvolatile digital memory or as continuously varying resistances. As nano-oscillators, they can serve as neurons, emulating the oscillatory behavior of sets of biological neurons. As superparamagnets, they can do so by emulating the random spiking of biological neurons. Magnetic textures like domain walls or skyrmions can be configured to function as neurons through their non-linear dynamics.

Several implementations of neuromorphic computing with spintronic devices demonstrate their promise in this context. Used as variable resistance synapses, magnetic tunnel junctions perform pattern recognition in an associative memory. As oscillators, they perform spoken digit recognition in reservoir computing and when coupled together, classification of signals. As superparamagnets, they perform population coding and probabilistic computing.

Simulations demonstrate that arrays of nanomagnets and films of skyrmions can operate as components of neuromorphic computers. While these examples show the unique promise of spintronics in this field, there are several challenges to scaling up, including the efficiency of coupling between devices and the relatively low ratio of maximum to minimum resistances in the individual devices.


Neuromorphic-Spintronics-Neuromorphic-Computing-with-Spin-Torque-Nano-oscillators-2

figure 1.

(a) Magnetic tunnel junctions for memory applications. A magnetic junction consists of two ferromagnetic layers (gray) separated by an insulating layer (blue) with the magnetization of one layer fixed and that of the other either parallel (low resistance) or antiparallel (high resistance) to it.

(b) Cross-bar array of magnetic tunnel junctions for high density storage (Magnetic Random Access Memory). The resistance of a particular tunnel junction is measured by activating the appropriate word line (red) allowing conduction between the bottom bit line and the top sense line (both blue). The alignment of the magnetization can be switched by passing sufficient currents through the device.

(c) Associative memory. (i) Handwritten digits from the MNIST dataset used for training the associative memory. (ii) Sample test input after training. (iii) Output of trained network from the test input showing successful association.


Neuromorphic-Spintronics-Neuromorphic-Computing-with-Spin-Torque-Nano-oscillators-3

Figure 2. Neuromorphic computing with Spin Torque nano-oscillators. 

(a) Schematic spin torque nano-oscillator. When designed appropriately, the free layer magnetization of a tunnel junction precesses when a dc current is passed through it. Because of the oscillating magnetoresistance, a fixed input current gives an oscillating voltage across the junction. 

(b) Reservoir computing with a spin torque nano-oscillator. Using time multiplexing in pre- and post-processing, a single spin torque nano-oscillator gives state of the art performance as a reservoir in a reservoir computing scheme. 

(c) Schematic use of coupled nano-oscillators for vowel recognition. The input is represented by the frequencies of two microwaves applied through a stripline to the oscillators. The natural frequencies of the oscillators are tuned by dc bias currents through the devise. These can be tuned so that the synchronization pattern between the oscillators corresponds to the desired output.

Neuromorphic-Spintronics-Neuromorphic-Computing-with-Spin-Torque-Nano-oscillators-4

Figure 3

(a) Schematic skyrmion structure. The magnetization direction of a single skyrmion is schematically given both by the directions of the arrows and the color coding, ranging from blue for magnetization up, through white for in-plane magnetization directions, to red for magnetization down. (b) Simulated skyrmion assembly. A reservoir computing scheme based on skyrmions in a random potential makes use of the distortions of the assembly due to current flow to provide the necessary non-linearity and memory.


Read more:

Ultrafast Switch from a Bose-Einstein Condensate Matter - Practicalintroduction

A Theoretical Perspective : Spin−Orbit Coupling in 2D Semiconductors

Bill Gates Reveals Technology That Will Dethrone Smartphones, What The Technology Is?

Measurement of the Higgs boson mass and width using the four-lepton final state in proton-proton collisions at √s = 13 TeV

Cellular Lasers for Cell Imaging and Biosensing


References :

1. Big data needs a hardware revolution. Nature (2018). doi:10.1038/d41586-018-01683-1 

2. Furber S Large-scale neuromorphic computing systems. J. Neural Eng 13, 051001 (2016). [PubMed: 27529195] 

3. Indiveri G et al. Neuromorphic silicon neuron circuits. Neuromorphic Eng 5, 73 (2011). 

4. Locatelli N, Cros V & Grollier J Spin-torque building blocks. Nat. Mater 13, 11–20 (2014). [PubMed: 24343514] 

5. Grollier J, Querlioz D & Stiles MD Spintronic Nanodevices for Bioinspired Computing. Proc. IEEE 104, 2024–2039 (2016).


Share:

Mengenal Tentang Teknologi BMS (Battlefield Management Systems) Berbasis Android Military

 

Mengenal-Tentang-Teknologi-BMS-Battlefield-Management-Systems-Berbasis-Android-Military


Adaptasi teknologi Android sebagai OS (operating system) dan perangkat memang telah masuk ke semua sektor kalangan. Termasuk pemanfaatan teknologi Android untuk operasi militer, pertahanan, dan keamanan. Android sebagai OS yang dinilai user friendly menjadi alasan utama penggunaanya. Begitupun juga dari sisi perangkat (hardware), sehingga membuat jenis smartphone dan tablet Android ini sangat mudah ditemui dipasaran.


Teknologi Android untuk militar telah berhasil dirancang oleh PT Hariff Daya Tunggal Engineering (DTE), dengan meluncurkan aplikasi BMS (Battlefield Management Systems) yang dipersiapkan untuk satuan Kavaleri TNI AD. Aplikasi BMS adalah sistem manajemen kendali dan komando taktis untuk prajurit di medan tempur.

Lewat perangkat teknologi BMS, prajurit di lapangan dapat saling mengetahui posisi dan kedudukan rekan-rekannya, sehingga tidak lagi terjadi salah tembak dan lebih mudah untuk mengatur strategi perang. Maklum dalam jalannnya peperangan, kekisruhan komunikasi dan visual kerap menjadi masalah yang serius.

Untuk menjamin komunikasi yang aman, teknologi BMS dipersiapkan untuk dapat melakukan interoperability dengan sistem atau alat komunikasi TNI yang sudah ada, baik di frekuensi HF, VHF dan UHF. Lebih hebatnya teknologi BMS menerapkan jaringan WiMax (Worldwide Interoperability for Microwave Access) Broadband Wireless Network yang juga dibuat PT Hariff DTE. Dengan WiMax, komunikasi antar prajurit tak hanya bicara soal voice, tapi juga mencakup komunikasi data dan multimedia yang kesemuanya ditawarkan dalam skema JAM (Jaringan Aman dan Mandiri) yang dilengkapi enkripsi.

Nah, pemanfaatan Android untuk militer di sini digunakan pada sisi terminal. Untuk perangkat BMS yang ditempatkan di kendaraan tempur berupa perangkat monitor terminal K230. Uniknya perangkat ini menggunakan tablet Android dari salah satu brand lokal. Meski begitu, tak terlihat fisik sebuah tablet, mengingat perangkat dilapisi moudling casing besi yang kuat. PT Hariff DTE merancang aplikasi khusus di tablet ini, sehingga tampilan user interface-nya lebih mirip Windows, sementara sambungan OS-nya mengusung Linux.

BMS juga dipersiapkan digunakan oleh prajurit infanteri. Dengan modal smartphone Caterpilar dan Sony Xperia yang punya kemampuan tahan banting dan anti air, prajurit dengan arm band dapat selalu memantau kondisi tempur di lapangan secara real time. Tapi jangan salah, meski menggunakan smartphone Android, tapi sistem seluler GSM-nya tidak digunakan. Seperti pada smartphone Caterpilar B15Q, prajurit di lapangan terkoneksi dengan WiFi ke modul BMS yang terpasang di perangkat manpack.


Share:

Panduan Lengkap Aktivasi Akun dan Kode Otorisasi DJP Tahun 2026

 

Panduan-Lengkap-Aktivasi-Akun-dan-Kode-Otorisasi-DJP-Tahun-2026


Mulai tahun pajak 2025, seluruh administrasi perpajakan cukup dilakukan melalui satu aplikasi modern: Coretax DJP. Itu berarti, SPT Tahunan 2025 yang harus disampaikan paling lambat Maret 2026 (untuk wajib pajak orang pribadi) dan April 2026 (untuk wajib pajak badan) juga wajib dilaporkan lewat Coretax.

Agar lebih siap, ada tiga hal penting yang perlu segera dilakukan. Pertama, Aktivasi Akun Coretax; kedua, Perolehan Kode Otorisasi DJP (KO DJP); dan ketiga, Validasi Kode Otorisasi.


Semakin cepat langkah ini dilakukan, Kawan Pajak semakin tenang menghadapi musim pelaporan SPT Tahunan nanti.


Langkah 1: Aktivasi Akun Coretax

Syarat utama: sudah memiliki Nomor Pokok Wajib Pajak (NPWP). Cara aktivasi akun adalah sebagai berikut.

1.    Buka laman Coretax DJP, lalu pilih Aktivasi Akun Wajib Pajak.

2.    Centang pertanyaan Apakah Wajib Pajak sudah terdaftar?.

3.    Masukkan NPWP dan klik Cari.

4.    Isi email dan nomor ponsel yang terdaftar pada DJP Online. (Jika terjadi perubahan data, hubungi Kring Pajak 1500200 atau kunjungi kantor pajak terderkat).

5.    Lakukan verifikasi identitas.

6.    Centang pernyataan kemudian klik Simpan.

7.    Cek email untuk Surat Penerbitan Akun Wajib Pajak berisi kata sandi sementara. Pastikan email berasal dari domain resmi @pajak.go.id.

8.    Login kembali ke Coretax lalu klick ganti kata sandi dan kemudian buat passphrase.


Akun Coretax berhasil diaktivasi.


Langkah 2: Membuat Kode Otorisasi DJP (KO DJP)

KO DJP adalah tanda tangan elektronik resmi yang diterbitkan DJP. Semua dokumen perpajakan melalui Coretax harus ditandatangani dengan KO DJP. Cara membuat KO DJP adalah sebagai berikut.

1.    Login di Coretax DJP.

2.    Masuk ke Portal Saya lalu klik pilih Permintaan Kode Otorisasi/Sertifikat Elektronik.

3.    Isi rincian sertifikat digital, pilih penyedia sertifikat (termasuk yang dikelola DJP).

4.    Masukkan ID Penandatangan atau buat passphrase.

5.    Centang pernyataan lalu klik Kirim.

6.    Jika berhasil, akan muncul notifikasi “Sertifikat Digital Berhasil Dibuat”.

7.    Unduh bukti tanda terima & surat penerbitan sertifikat digital.


Langkah 3: Validasi Kode Otorisasi

1.    Masuk ke Portal Saya yatu Profil Saya.

2.    Pilih menu Nomor Identifikasi Eksternal lalu tab Digital Certificate.

3.    Pastikan status = VALID. Jika masih INVALID, klik Periksa Status.

4.    Jika sukses, klik tombol Menghasilkan.

5.    Dokumen Penerbitan Kode Otorisasi DJP akan terbit di menu Dokumen Saya.


KO DJP sudah aktif dan tervalidasi.


Dengan aktivasi akun Coretax dan KO DJP yang valid, kita memperoleh sejumlah keuntungan. Urusan perpajakan menjadi lebih praktis, karena semua layanan dalam satu aplikasi; aman, karena menggunakan tanda tangan elektronik resmi DJP; dan siap, karena tak perlu panik saat musim laporan SPT tahunan tiba.


Sumber :

#https://www.pajak.go.id/id/artikel/panduan-praktis-aktivasi-akun-dan-kode-otorisasi-djp

Share:

Birmingham Business School Masters Scholarships 2026 in United Kingdom (UK)

 

Birmingham-Business-School-Masters-Scholarships-2026-in-United-Kingdom-UK


Scholarships for international students

At Birmingham, we believe in removing all barriers to education, so all of our talented students can achieve their full potential. Explore our wide variety of scholarships available for international students.

More than £10.5 million in scholarships is available for international students coming to study at Birmingham. 

At Birmingham, we are dedicated to supporting international students to join our university and recognise those who excel in their subject through our competitive scholarships offer.

There may also be funding available from other sponsors, governmental or funding bodies to help you fund your studies.

All of these scholarships celebrate outstanding achievement and recognise talent from around the world who want to study at a global top 100 university


Birmingham Business School Masters Scholarships

Birmingham Business School Masters Scholarships are designed to empower the next generation of leaders who are passionate about advancing responsible business.


Award details:

Award type:

University


Award value:

Awards up to £25,000


Application deadline:

31 May 2026


Study level:

Postgraduate Taught


Qualification level:

Masters


Campus:

Birmingham (Edgbaston)


For 2026, we are offering several scholarships to invest in future leaders who will set new global standards for responsible business leadership through challenging the status quo to seek progressive solutions to complex global challenges.


Scholarships will be awarded in the following categories:

  • Dean's Award for Academic Excellence
  • Dean's Responsible Business Award
  • Dean's Outstanding Talent Award


Who can apply?

Open to offer-holders domiciled outside of China and India who have received an offer to study a taught Masters degree with Birmingham Business School in September 2026. Students from China should apply for the Postgraduate Chancellor's Scholarship for China and students from India should apply for the Postgraduate Chancellor's Scholarship for India.

To be eligible for this award you must hold an offer for one of the eligible MSc programmes based at our Birmingham campus listed below:

  • AI in Management MSc
  • Accounting and Finance MSc
  • Business Analytics MSc
  • Economics MSc
  • Economics, AI and Data Science MSc
  • Financial Economics MSc
  • Financial Management MSc
  • Financial Technology MSc
  • Human Resource Management MSc
  • International Business MSc
  • Investments MSc
  • Management MSc
  • Marketing MSc
  • Money Banking and Finance MSc
  • Strategic Marketing and Consulting MSc
  • Supply Chain Management MSc
  • Sustainable Finance MSc
  • Sustainable Innovation and Entrepreneurship MSc


Eligible countries

This scholarship is open to all students who live outside of China or India. Students from China should apply for the Postgraduate Chancellor's Scholarship for China and students from India should apply for the Postgraduate Chancellor's Scholarship for India.


How to Apply

Apply study a full-time MSc programme at Birmingham Business School.

If your application is successful, you will receive a scholarship application link shortly after receiving your offer letter.

Apply for one of our Birmingham Business School Masters scholarships via the application link by the deadline. As part of your application, you will need to submit a personal statement and answer an essay question focused on responsible business.

Your application will be assessed by committee on a rolling basis. You will be notified of the outcome of your application by email.


Ask a Question:

Ask our subject team a question or sign up to our mailing list to stay up to date with our latest events, or (www.birmingham.ac.uk), scholarships and subject news.


Every scholarship may have a different application process – or none at all. Read the application details carefully and submit your application by the deadline. For more details, visit our scholarships application page. 😊


Read more :

Monash International Leadership Scholarship of 2026 at Monash University in Australia

Engineering International High Achievers Scholarship of 2026 Available at Monash University in Australia

NUS Global Merit Scholarship at National University of Singapore in 2026

DAAD : Deutscher Akademischer Austauschdienst - Doctoral Programmes Scholarship 2026 in Germany




Share:

Happy Wolrd Teacher Day

Daily Page View

Label

Adobe Acrobat Adobe Photoshop Alexa Rank Andorid Application Art Austria BUMN Beginner Belgium Blog Community Blogger Bupati Gresik CPNS/PPPK Canada Coin Market Cap Computers Cosmology Cryptocurrency Dancing Denmark Doctoral Doker Education Educational Excel Excel Table Features Film Finland French Gadget Gallery Garuda Emas Germany Google Analytics Google Form Hardware Homestay Hong Kong Ilovepdf Indrawan Vpp Interior Design Ireland Italy KKPR dan PKKPR Kampung hijau Karang Taruna Karir/Career Keyword Keywords LKPM LaTeX Linux Lowongan Kerja BUMN/SWASTA Mac Majalah Tech Material Physics Material Physics. Mechanical Engineering (ME) Microsoft 365 Microsoft Excel Microsoft Office Microsoft PowerPoint Microsoft Word NFC Nero Nero Burning 2021 Networking New Technology OSS RBA OTOMOTIF Operating Systems Optic PDF PT Aerotrans Services Indonesia (Garuda Indonesia Group) PT Astra Tol Nusantara (ASTRA Infra) PT Indomarco Prismatama (Indomaret Group) PT Indonesia Epson Industry PT Jakarta Industrial Estate Pulogadung PT Pertamina Training & Consulting (PTC) PT. Indofarma (Persero) PT. Kimia Farma Group Perizinan Berusaha Persetujuan Lingkungan Pinjaman Online Posgraduate Postgraduate PowerPoint Presentations Profil Perusahaan/Company Profil Profil-Perusahan Publisher Pyrolysis Quantum Computing Quantum Physics Quiz Renewable Energy Research SEO SWASTA Scholarship Semi conductor Semiconductor Sertifikat Halal Smartphone Spintronic Study Abroad Super Capasitor Superconductor Tata Cara Pendaftaran Surat Izin Usaha Industri (SIUI) Technology Tecnology Thailand The Best Trip & Travel Tutorial United Kingdom United Stated United States VGA card Website Windows 365 Windows Tips Word Document WordPress Zero Waste chromium tricks font iphone iphone 13 Pro iphone 13 Pro Max iphone 13 Pro Max gsmarena online zodiak